普羅菲司最新款PFXGP6500TAD強力推薦!!



Pro-face

  • 2022 04.09
  • -

PFXGP4502WADW – Pro-face可程式人機介面GP4000E系列

Tags :

Category : Pro-face , 人機介面GP4000E系列

GP-4502WW 型錄：中文型錄.pdf

PFXGP4502WADW - Pro-face可程式人機介面GP4000E系列

GP-4502WW
機型: PFXGP4502WADW

TFT Color LCD   （65,536 色） /   顯示解析度: WVGA

功能規格

顯示類型 TFT 彩色 LCD
顯示大小 10″ 寬螢幕
解析度 800 x 480 畫素 (WVGA)
有效可視面積 154.08 x 85.92 mm (6.066 x 3.382 in.)
顯示顏色 65,536 色
背光 LED
亮度控制 8 段，透過觸控螢幕設定
背光使用年限 20,000 小時以上 (在25 °C [77 °F]下連續工作 – 亮度下降至原來的50%)
語言字型 ASCII: (code page 850)字母數字(包含歐洲字符)
簡體中文: GB2312-80 codes
日文: ANK 158, Kanji: 6,962 (JIS standards 1 & 2) (including 607 nonkanji characters)
韓文: (KSC5601 – 1992 codes) Hangul fonts
繁體中文: Big 5
字元大小 標準字型: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 點字型
字型大小 寬度可達1, 2, 4, 8倍。高度可達1/2, 1, 2, 4, 8 倍
文字 8 x 8 點 40 字 x 30 列
8 x 16 點 40 字 x 15 列
16 x 16 點 20 字 x 15 列
32 x 32 點 10 字 x 7 列
應用程式記憶體 FLASH EPROM 32 MB
資料備份 FLASH EPROM 128 KB
時鐘精確度 視作業溫度及裝置機齡而定，時鐘每月偏差可達 -380 至 +90 秒
觸控面板類型 電阻式薄膜(類比)
觸控面板使用年限 一百萬個開關執行和一百萬次的操作
介面 序列埠 (COM1) RS-232C 非同步傳輸, 資料長度: 7 或 8 bit, 同位元: 無, 奇同位 或 偶同位, 停止位元:1 或 2 bit, 傳輸速率:2,400 bps 至 115,200 bps D-Sub 9 pin (公頭)
序列埠 (COM2) RS-422 / RS-485 非同步傳輸, 資料長度: 7 或 8 bit, 同位元: 無, 奇同位 或 偶同位, 停止位元:1 或 2 bit, 傳輸速率:2,400 bps 至 187,500 bps D-Sub 9 pin (公頭)
乙太網路 (LAN) IEEE802.3i / IEEE802.3u, 10BASE-T/100BASE-TX
USB (TYPE-A) 符合USB2.0 (Type A) x 1, 最大傳輸距離: 3 m (9.84 ft)
USB (mini-B) 符合USB2.0 (mini-B) x 1, 最大傳輸距離: 3 m (9.84 ft)
  1. 為節省背光模組使用年限，請設定讓螢幕自動進入待機模式(在一段時間未操作後)。
  2. 顯示的字型依所選語言或字型大小而有所不同。另外，若使用 GP-Pro EX 時，可選用高解析度16 x 16的字型，或更大的字符。
  3. 可供應用程式使用的空間。空間大小取決於您從編輯軟體載入多少字型。

一般規格

國際安全標準 kc　
輸入電壓 DC 24V
允許的壓降 1ms以下(最低輸入電壓)，10ms以下(額定輸入電壓)
消耗功率 9.2W
湧入電流 50 A 以下
耐壓特性 AC600V 20mA於1分鐘內
絕緣電阻 DC500V,10MΩ以上
周圍空氣溫度 0 至 50 °C [32 至 122 °F]
儲存溫度 -20 至 60 °C [-4 至 140 °F]
環境濕度 85 % RH (濕球溫度：最大 39 ℃ – 非結露環境)
儲存濕度 85 % RH (濕球溫度：最大 39 ℃ – 非結露環境)
灰塵 0.1 mg/m³ (10-7 oz/ft³)以下(絕緣等級)
汙染程度 適用於汙染程度 2 的環境
環境規格 非腐蝕性氣體的環境
耐氣壓震動（高度範圍） 800 至 1,114 hPa（海拔 2,000 公尺或以下）
耐震動 IEC/EN60068-2-6, 5 至 150 Hz, 最大3.5 mm (0.38 in), 1gn pm 3 軸
耐衝擊 IEC 60068 – 2 – 27,正弦脈衝11毫秒, 15克力量於3軸上
抗靜電放電力 EN/IEC 61131-2 4 kV接觸式放電, 8kV非接觸式放電
突波 IEC 61000 – 4 – 5, 0.5 kV (電源差分模式), 1 kV (電源共模)
結構規格 前面板: IP 65 (IEC60529),類型4外殼，僅限室内使用(Ul50)，帶安裝固定螺絲, 背板: IP 20 (IEC 60529)
冷卻方法 自然氣流
外部尺寸 W 275 mm x H206 mm x D392 mm
  1. 浪湧電流，半高寬值（全寬半高）大約是50微秒（超過25A時)

外部尺寸


GP4000E External Dimensions

安裝接線後外部尺寸


GP4000E External Dimensions with cables

開孔尺寸


GP4000E Panel Cut-out
  • 2020 04.17
  • -

PFXGP4601TAA – Pro-face可程式人機介面GP4000系列

Tags :

Category : Pro-face , 人機介面GC4000系列

GP-4601T
機型: PFXGP4601TAA

TFT Color LCD   （65,536 色） /  12.1″/ 顯示解析度: 800 x 600 像素 (SVGA)

功能規格

顯示類型 TFT 彩色 LCD
顯示大小 12.1″
解析度 800 x 600 畫素 (SVGA)
有效可視面積 W246.0 x H184.5 mm [W9.69 x H7.26 in.]
顯示顏色 65,536 色（無閃爍）∕16,384 色（閃爍）
背光 White LED (User nonreplaceable parts. When replacement is required, contact your local distributor.
亮度控制 16 階 (使用觸控面板調整)
背光使用年限 50,000 hrs. or more (continuous operation at 25°C [77 °F] before backlight brightness decreases to 50%)
語言字型 Japanese: 6,962 (JIS Standards 1 & 2) (including 607 non-kanji characters) ANK: 158 (Korean fonts, Simplified Chinese and Traditional Chinese fonts are downloadable.)
字元大小 標準字型：8 x 8、8 x 16、16 x 16 及 32 x 32 點字型，筆劃字形：6 至 127 點字型，影像字型：8 至 72 點字型
字型大小 標準字型：寬度可達 8 倍；高度可達 8 倍。
文字 8 x 8 點 100 字 x 75 列
8 x 16 點 100 字 x 37 列
16 x 16 點 50 字 x 37 列
32 x 32 點 25 字 x 18 列
控制記憶體 可變區 SRAM 64 KB (Replaceable Lithium battery for backup memory)
程式區 FLASH EPROM 132 KB (Equivalent to 15,000 steps)
應用程式記憶體 FLASH EPROM 32 MB (including a logic program area)
資料備份 SRAM 512K byte (資料備份用) *512KB=HMI 320KB+控制192KB(可替換式鋰電池供記憶體備份時使用)
時鐘精確度 每月 ±65 秒（室溫及電源關閉時會造成偏差）
觸控面板類型 Resistive Film (matrix)
觸控面板解析度 40 x 30 keys/screen
觸控面板使用年限 1,000,000 times or more
介面 序列埠 (COM1) RS-232C Asynchronous Transmission Data Length: 7 or 8 bit, Parity: none, Odd or Even, Stop Bit: 1 or 2 bit, Data Transmission Speed: 2,400 bps to 115.2 kbps, Connector: D-Sub9 (plug)
序列埠 (COM2) RS-422/485 Asynchronous Transmission Data Length: 7 or 8 bit Parity: none, Odd or Even Stop Bit: 1 or 2 bit Data Transmission Speed: 2,400 bps to 115.2 kbps, 187.5kbps (MPI) Connector: D-Sub9 (plug)
乙太網路 (LAN) IEEE802.3i/IEEE802.3u，10BASE-T/100BASE-TX，接頭：模組化插孔 (RJ-45) x 1
USB (TYPE-A) 符合 USB2.0 (TYPE-A) x 1、電源電壓：DC 5 V ±5 %、輸出電流：500 mA 或以下、通信距離：5 公尺或以下
USB (mini-B) Conforms to USB2.0 (mini-B) x 1 Communication Distance: 5 m or less
SD 卡 SD Card Slot x 1
  1. 其它字型大小可使用 Editor 軟體進行設定
  2. Up to 60,000 steps can be converted in software. However, this reduces application memory capacity (for screen data) by 1 MB.
  3. 視作業溫度及裝置機齡而定，時鐘每月偏差可達 -380 至 +90 秒。若此偏差程度對系統造成問題，則用戶應進行監視並在必要時加以調整。

一般規格

國際安全標準

 ce  ctick  eac   kc   ul508 ul508ansi
輸入電壓 AC 100 至 240 V
額定電壓 AC 85 至 264 V
允許的壓降 1 週期或以下（電壓下降須間隔 1 秒或以上）
湧入電流 30 A 或以下
耐壓特性 AC 2,000 V, 20 mA for 1 min (between charging and FG terminals)
絕緣電阻 DC 500 V，10 MΩ 或以上（充電部端子與 FG 端子間）
周圍空氣溫度 0 to 55 °C [32 to 131 °F]
儲存溫度 -20 to 60 °C [-4 to 140 °F]
環境濕度 10 to 90 % RH (Wet bulb temperature: 39 °C [102.2 °F] or less – no condensation.)
儲存濕度 10 to 90 % RH (Wet bulb temperature: 39 °C [102.2 °F] or less – no condensation.)
灰塵 0.1 mg/m³ (10-7 oz/ft³) or less (non-conductive levels)
汙染程度 適用於汙染程度 2 的環境
環境規格 非腐蝕性氣體的環境
耐氣壓震動（高度範圍） 800 至 1,114 hPa（海拔 2,000 公尺或以下）
耐震動 IEC/EN61131-2 compliant, 5 to 9 Hz Single amplitude 3.5 mm [0.14 in.], 9 to 150 Hz Fixed acceleration: 9.8 m/s², X, Y, Z directions for 10 cycles (approx. 100 min)
耐衝擊 符合 IEC/EN61131-2 規格，147 m/s²，X、Y、Z 方向 3 次
耐雜訊 Noise Voltage: 1,500 Vp-p, Pulse Duration: 1 µs, Rise Time: 1 ns (via noise simulator)
抗靜電放電力 接觸放電法：6 kV（IEC/EN61000-4-2 第3級）
接地 Functional grounding: Grounding resistance of 100Ω, 2mm² (AWG 14) or thicker wire, or your country’s applicable standard. (Same for FG and SG terminals)
結構規格 IP65f NEMA #250 TYPE 4X/13（裝入外殼時在前面板上）
冷卻方法 自然氣流
大約重量 2.5 kg [5.5 lb] 或以下（僅限顯示裝置）
外部尺寸 W315x H241x D56 mm [W12.4 x H9.49 x D2.2 in.]
挖孔尺寸 W301.5 x H227.5 mm [W11.87 x H8.96 in.], Panel thickness area: 1.6 to 5 mm [0.06 to 0.2 in.]
  1. The front face of the GP unit, installed in a solid panel, has been tested using conditions equivalent to the standards shown in the specification. Even though the GP unit’s level of resistance is equivalent to these standards, oils that should have no effect on the GP can possibly harm the unit. This can occur in areas where either vaporized oils are present, or where low viscosity cutting oils are allowed to adhere to the unit for long periods of time. If the GP’s front face protection sheet becomes peeled off, these conditions can lead to the ingress of oil into the GP and separate protection measures are suggested. Also, if non-approved oils are present, it may cause deformation or corrosion of the front panel’s plastic cover. Therefore, prior to installing the GP unit, be sure to confirm the type of conditions that will be present in the GP’s operating environment. If the installation gasket is used for a long period of time, or if the unit and its gasket are removed from the panel, the original level of the protection cannot be guaranteed. To maintain the original protection level, be sure to replace the installation gasket regularly.
  2. 在尺寸公差方面， +1/-0 mm [+0.04/-0 in.] 以及 R 角皆小於 R3 [R0.12 in.]。

外部尺寸

 

 

 

開孔尺寸

 

 

包含接線的外部尺寸

 

  • 2016 05.13
  • -

GP4107W1D (單色機種) – Pro-face可程式人機介面GP4100series系列

Tags :

Category : Pro-face , 人機介面GP4100系列

GP4107W1D (單色機種) - Pro-face可程式人機介面GP4100series系列

GP-4107W
機型: GP4107W1D

Monochrome LCD   （16 灰階） /   顯示解析度: 200×80 pixels

功能規格

顯示類型 STN Monochrome LCD
顯示大小 3.4″
解析度 200 x 80 pixels
點距 W0.4 x H0.4 mm [W0.02 x H0.02 in.]
有效可視面積 79.985 x 31.985 mm
顯示顏色 Monochrome White/Red/Pink (16 Levels)
背光 White/Red LED (User nonreplaceable parts. Factory replacement required.)
亮度控制 16 Levels (Adjusted with the touch panel)
對比控制 8 Levels (Adjusted with the touch panel)
背光使用年限 White: 50,000 hrs. or more, Red 10,000 hrs. or more (each in continuous operation at 25℃ before backlight brightness decreases to 50%)
語言字型 Japanese, ASCII, Chinese (Simplified), Chinese (Traditional), Korean, Cyrillic, Thai
字元大小 Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts, Stroke font: 6 to 80 pixel fonts, Image font: 8 to 72 pixel fonts
字型大小 Standard font: Width can be expanded up to 8 times. Height can be expanded up to 8 times.
文字 8 x 16 點 25 char. x 5 rows
16 x 16 點 12 char. x 5 rows
32 x 32 點 6 char. x 2 rows
應用程式記憶體 FLASH EPROM 2.2 MB (Stores the Alarm History Data, Recipe Data, and Brightness/Contrast Control Settings)
資料備份 Equivalent to 128KB
時鐘精確度 Uses the clock of an external device
觸控面板類型 Resistive Film (analog)
觸控面板解析度 1,024 x 1,024
觸控面板使用年限 1,000,000 times or more
介面 序列埠 (COM1) RS-485 (isolation), Asynchronous Transmission, Data Length: 7 or 8 bit, Parity: none, Odd or Even, Stop Bit: 1 or 2 bit, Data Transmission Speed: 2,400 bps to 115.2 kbps, 187.5 kbps (MPI), Connector: D-Sub9 (socket)
USB (TYPE-A) Conforms to USB2.0 (Type-A) x 1, Power Supply Voltage: DC 5 V ±5 %, Communication Distance: 5 m or less
USB (mini-B) Conforms to USB2.0 (mini-B) x 1, Communication Distance: 5 m or less
  1. The backlight burnout detection function is not supported.
  2. Please refer to the GP-Pro EX Reference Manual for details on font types and character codes.
  3. Other font sizes can be set up with the Editor software.
  4. Capacity available for user application.
  5. Application memory can provide 128KB for Data Backup. For further information, please refer to the GP-Pro EX reference manual.
  6. Set up the “Clock Updates“ feature with the Editor software. Please refer to the GP-Pro EX Reference Manual “Common” – “Clock Update Settings” for details.
  7. If connecting a bar code reader to the GP, be sure to supply power from an external source (such as a self-powered hub). If connecting a bar code reader to the GP, be sure to supply power from an external source (such as a self-powered hub). If you supply

一般規格

國際安全標準

 

absce ctick   dnv eac   kc   ul508 ul508ansi
輸入電壓 DC 24 V
額定電壓 DC 19.2 to 28.8 V
允許的壓降 3 ms or less
消耗功率 6.5 W or less
湧入電流 30 A or less
耐壓特性 AC 1,000 V, 20 mA for 1 min (between charging and FG terminals)
絕緣電阻 DC 500 V, 10 MΩ or more (between charging and FG terminals)
周圍空氣溫度 0 to 50 ℃
儲存溫度 -20 to +60 ℃
環境濕度 10 to 90 % RH (Wet bulb temperature: 39 ℃ or less – no condensation.)
儲存濕度 10 to 90 % RH (Wet bulb temperature: 39 ℃ or less – no condensation.)
灰塵 0.1 mg/m³ or less (non-conductive levels)
汙染程度 For use in Pollution Degree 2 environment
環境規格 Free of corrosive gases
耐氣壓震動（高度範圍） 800 to 1,114 hPa (2,000 m above sea level or less)
耐震動 IEC/EN61131-2 compliant, 5 to 9 Hz Single amplitude 3.5 mm [0.14 in.], 9 to 150 Hz Fixed acceleration: 9.8 m/s², X, Y, Z directions for 10 cycles (100 min)
耐衝擊 IEC/EN61131-2 compliant, 147 m/s², X, Y, Z directions for 3 times
耐雜訊 Noise Voltage: 1,000 Vp-p, Pulse Duration: 1 µs, Rise Time: 1 ns, (via noise simulator)
耐雜訊（快速暫態突發雜訊） Power Line: 2 kV (IEC/EN61000-4-4), COM Port: 1 kV (IEC/EN61000-4-4)
抗靜電放電力 Contact Discharge Method: 6 kV/Air Discharge Method: 8 kV (IEC/EN61000-4-2 Level 3)
接地 Functional grounding: Grounding resistance of 100Ω, 2mm² or thicker wire, or your country’s applicable standard. (Same for FG and SG terminals)
結構規格 IP65f NEMA #250 TYPE 4X/13 (on the front panel when properly installed in an enclosure)
安裝配置 Embedded panel
冷卻方法 Natural air circulation
大約重量 0.2 kg [0.4 lb] or less (display unit only)
外部尺寸 W116.5 x H77.5 x D28 mm [W4.59 x H3.05 x D1.1 in.]
挖孔尺寸 W105 x H66 mm [W6.14 x H4.86 in.], Panel thickness area: 1 to 5 mm [0.04 to 0.2 in.]
顏色 Silver
材料 Resin
  1. When using in an environment where the temperature becomes or exceeds 40 ℃ for an extended period of time, the screen contrast level may decrease from its original level of brightness.
  2. The front face of the GP unit, installed in a solid panel, has been tested using, conditions equivalent to the standards shown in the specification. Even though the, GP unit’s level of resistance is equivalent to these standards, oils that should have, no
  3. Regarding dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.]. Even if panel thickness is within recommend range for “Panel Cut Dimensions”, the panel could warp, depending on panel’s material, size, and insta

外部尺寸 / 介面 / 挖孔尺寸

  • 2016 05.13
  • -

GP4107G1D (單色機種) – Pro-face可程式人機介面GP4100series系列

Tags :

Category : Pro-face , 人機介面GP4100系列

GP4107G1D (單色機種) - Pro-face可程式人機介面GP4100series系列

GP-4107G
機型: GP4107G1D

Monochrome LCD   （16 灰階） /   顯示解析度: 200×80 pixels

功能規格

顯示類型 STN Monochrome LCD
顯示大小 3.4″
解析度 200 x 80 pixels
點距 W0.4 x H0.4 mm [W0.02 x H0.02 in.]
有效可視面積 79.985 x 31.985 mm
顯示顏色 Monochrome Green/Red/Orange (16 Levels)
背光 Green/Red LED (User nonreplaceable parts. Factory replacement required.)
亮度控制 16 Levels (Adjusted with the touch panel)
對比控制 8 Levels (Adjusted with the touch panel)
背光使用年限 Green: 50,000 hrs. or more, Red 10,000 hrs. or more (each in continuous operation at 25℃ before backlight brightness decreases to 50%)
語言字型 Japanese, ASCII, Chinese (Simplified), Chinese (Traditional), Korean, Cyrillic, Thai
字元大小 Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts, Stroke font: 6 to 80 pixel fonts, Image font: 8 to 72 pixel fonts
字型大小 Standard font: Width can be expanded up to 8 times. Height can be expanded up to 8 times.
文字 8 x 16 點 25 char. x 5 rows
16 x 16 點 12 char. x 5 rows
32 x 32 點 6 char. x 2 rows
應用程式記憶體 FLASH EPROM 2.2 MB (Stores the Alarm History Data, Recipe Data, and Brightness/Contrast Control Settings)
資料備份 Equivalent to 128KB
時鐘精確度 Uses the clock of an external device
觸控面板類型 Resistive Film (analog)
觸控面板解析度 1,024 x 1,024
觸控面板使用年限 1,000,000 times or more
介面 序列埠 (COM1) RS-485 (isolation), Asynchronous Transmission, Data Length: 7 or 8 bit, Parity: none, Odd or Even, Stop Bit: 1 or 2 bit, Data Transmission Speed: 2,400 bps to 115.2 kbps, 187.5 kbps (MPI), Connector: D-Sub9 (socket)
USB (TYPE-A) Conforms to USB2.0 (Type-A) x 1, Power Supply Voltage: DC 5 V ±5 %, Communication Distance: 5 m or less
USB (mini-B) Conforms to USB2.0 (mini-B) x 1, Communication Distance: 5 m or less
  1. The backlight burnout detection function is not supported.
  2. Please refer to the GP-Pro EX Reference Manual for details on font types and character codes.
  3. Other font sizes can be set up with the Editor software.
  4. Capacity available for user application.
  5. Application memory can provide 128KB for Data Backup. For further information, please refer to the GP-Pro EX reference manual.
  6. Set up the “Clock Updates“ feature with the Editor software. Please refer to the GP-Pro EX Reference Manual “Common” – “Clock Update Settings” for details.
  7. If connecting a bar code reader to the GP, be sure to supply power from an external source (such as a self-powered hub). If connecting a bar code reader to the GP, be sure to supply power from an external source (such as a self-powered hub). If you supply

一般規格

國際安全標準

 

abs   ce ctick dnv eac   kc   ul508 ul508ansi
輸入電壓 24 Vdc
額定電壓 19.2 至 28.8 Vdc
允許的壓降 3 ms以下
耗電量 8.2W
湧入電流 30 A or less
耐雜訊 雜訊電壓：1,000 Vp-p
脈衝寬度：1 µs
上升時間：1 ns
(雜訊模擬器測得)
耐壓特性 AC1,000V 20mA於1分鐘內(充電部端子與 FG 端子間)
周圍空氣溫度 0 to 50 ℃
儲存溫度 -20 to +60 ℃
環境濕度 10 to 90 % RH (Wet bulb temperature: 39 ℃ or less – no condensation.)
儲存濕度 10 to 90 % RH (Wet bulb temperature: 39 ℃ or less – no condensation.)
灰塵 0.1 mg/m³ or less (non-conductive levels)
汙染程度 For use in Pollution Degree 2 environment
環境規格 Free of corrosive gases
耐氣壓震動（高度範圍） 800 to 1,114 hPa (2,000 m above sea level or less)
耐震動 IEC/EN61131-2 compliant, 5 to 9 Hz Single amplitude 3.5 mm [0.14 in.], 9 to 150 Hz Fixed acceleration: 9.8 m/s², X, Y, Z directions for 10 cycles (100 min)
耐衝擊 IEC/EN61131-2 compliant, 147 m/s², X, Y, Z directions for 3 times
耐雜訊（快速暫態突發雜訊） Power Line: 2 kV (IEC/EN61000-4-4), COM Port: 1 kV (IEC/EN61000-4-4)
抗靜電放電力 Contact Discharge Method: 6 kV/Air Discharge Method: 8 kV (IEC/EN61000-4-2 Level 3)
接地 Functional grounding: Grounding resistance of 100Ω, 2mm² or thicker wire, or your country’s applicable standard. (Same for FG and SG terminals)
結構規格 IP65f NEMA #250 TYPE 4X/13 (on the front panel when properly installed in an enclosure)
安裝配置 Embedded panel
冷卻方法 Natural air circulation
大約重量 0.2 kg [0.4 lb] or less (display unit only)
外部尺寸 W116.5 x H77.5 x D28 mm [W4.59 x H3.05 x D1.1 in.]
挖孔尺寸 W105 x H66 mm [W6.14 x H4.86 in.], Panel thickness area: 1 to 5 mm [0.04 to 0.2 in.]
  1. When using in an environment where the temperature becomes or exceeds 40 ℃ for an extended period of time, the screen contrast level may decrease from its original level of brightness.
  2. The front face of the GP unit, installed in a solid panel, has been tested using, conditions equivalent to the standards shown in the specification. Even though the, GP unit’s level of resistance is equivalent to these standards, oils that should have, no
  3. Regarding dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.]. Even if panel thickness is within recommend range for “Panel Cut Dimensions”, the panel could warp, depending on panel’s material, size, and insta

外部尺寸

開孔尺寸

包含接線的外部尺寸

  • 2016 05.13
  • -

GP4106W1D (單色機種) – Pro-face可程式人機介面GP4100series系列

Tags :

Category : Pro-face , 人機介面GP4100系列

GP4106W1D (單色機種) - Pro-face可程式人機介面GP4100series系列

GP-4106W
機型: GP4106W1D

Monochrome LCD   （16 灰階） /   顯示解析度: 200×80 pixels

功能規格

顯示類型 STN Monochrome LCD
顯示大小 3.4″
解析度 200 x 80 pixels
點距 W0.4 x H0.4 mm [W0.02 x H0.02 in.]
有效可視面積 79.985 x 31.985 mm
顯示顏色 Monochrome White/Red/Pink (16 Levels)
背光 White/Red LED (User nonreplaceable parts. Factory replacement required.)
亮度控制 16 Levels (Adjusted with the touch panel)
對比控制 8 Levels (Adjusted with the touch panel)
背光使用年限 White: 50,000 hrs. or more, Red 10,000 hrs. or more (each in continuous operation at 25℃ before backlight brightness decreases to 50%)
語言字型 Japanese, ASCII, Chinese (Simplified), Chinese (Traditional), Korean, Cyrillic, Thai
字元大小 Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts, Stroke font: 6 to 80 pixel fonts, Image font: 8 to 72 pixel fonts
字型大小 Standard font: Width can be expanded up to 8 times. Height can be expanded up to 8 times.
文字 8 x 16 點 25 char. x 5 rows
16 x 16 點 12 char. x 5 rows
32 x 32 點 6 char. x 2 rows
應用程式記憶體 FLASH EPROM 2.2 MB (Stores the Alarm History Data, Recipe Data, and Brightness/Contrast Control Settings)
資料備份 Equivalent to 128KB
時鐘精確度 Uses the clock of an external device
觸控面板類型 Resistive Film (analog)
觸控面板解析度 1,024 x 1,024
觸控面板使用年限 1,000,000 times or more
介面 序列埠 (COM1) RS-422/485, Asynchronous Transmission, Data Length: 7 or 8 bit, Parity: none, Odd or Even, Stop Bit: 1 or 2 bit, Data Transmission Speed: 2,400 bps to 115.2 kbps, Connector: 2-piece terminal block 9 pin
USB (TYPE-A) Conforms to USB2.0 (Type-A) x 1, Power Supply Voltage: DC 5 V ±5 %, Communication Distance: 5 m or less
USB (mini-B) Conforms to USB2.0 (mini-B) x 1, Communication Distance: 5 m or less
  1. The backlight burnout detection function is not supported.
  2. Please refer to the GP-Pro EX Reference Manual for details on font types and character codes.
  3. Other font sizes can be set up with the Editor software.
  4. Capacity available for user application.
  5. Application memory can provide 128KB for Data Backup. For further information, please refer to the GP-Pro EX reference manual.
  6. Set up the “Clock Updates“ feature with the Editor software. Please refer to the GP-Pro EX Reference Manual “Common” – “Clock Update Settings” for details.
  7. If connecting a bar code reader to the GP, be sure to supply power from an external source (such as a self-powered hub). If connecting a bar code reader to the GP, be sure to supply power from an external source (such as a self-powered hub). If you supply

一般規格

國際安全標準

 

absce   ctick dnv eac   kc   ul508 ul508ansi
輸入電壓 DC 24 V
額定電壓 DC 19.2 to 28.8 V
允許的壓降 3 ms or less
消耗功率 6.2 W or less
湧入電流 30 A or less
耐壓特性 AC 1,000 V, 20 mA for 1 min (between charging and FG terminals)
絕緣電阻 DC 500 V, 10 MΩ or more (between charging and FG terminals)
周圍空氣溫度 0 to 50 ℃
儲存溫度 -20 to +60 ℃
環境濕度 10 to 90 % RH (Wet bulb temperature: 39 ℃ or less – no condensation.)
儲存濕度 10 to 90 % RH (Wet bulb temperature: 39 ℃ or less – no condensation.)
灰塵 0.1 mg/m³ or less (non-conductive levels)
汙染程度 For use in Pollution Degree 2 environment
環境規格 Free of corrosive gases
耐氣壓震動（高度範圍） 800 to 1,114 hPa (2,000 m above sea level or less)
耐震動 IEC/EN61131-2 compliant, 5 to 9 Hz Single amplitude 3.5 mm [0.14 in.], 9 to 150 Hz Fixed acceleration: 9.8 m/s², X, Y, Z directions for 10 cycles (100 min)
耐衝擊 IEC/EN61131-2 compliant, 147 m/s², X, Y, Z directions for 3 times
耐雜訊 Noise Voltage: 1,000 Vp-p, Pulse Duration: 1 µs, Rise Time: 1 ns, (via noise simulator)
耐雜訊（快速暫態突發雜訊） Power Line: 2 kV (IEC/EN61000-4-4), COM Port: 1 kV (IEC/EN61000-4-4)
抗靜電放電力 Contact Discharge Method: 6 kV/Air Discharge Method: 8 kV (IEC/EN61000-4-2 Level 3)
接地 Functional grounding: Grounding resistance of 100Ω, 2mm² or thicker wire, or your country’s applicable standard. (Same for FG and SG terminals)
結構規格 IP65f NEMA #250 TYPE 4X/13 (on the front panel when properly installed in an enclosure)
安裝配置 Embedded panel
冷卻方法 Natural air circulation
大約重量 0.2 kg [0.4 lb] or less (display unit only)
外部尺寸 W116.5 x H77.5 x D28 mm [W4.59 x H3.05 x D1.1 in.]
挖孔尺寸 W105 x H66 mm [W4.13 x H2.6 in.], 面板厚度區域 : 1 to 5 mm [0.04 至 0.2 in.]
  1. When using in an environment where the temperature becomes or exceeds 40 ℃ for an extended period of time, the screen contrast level may decrease from its original level of brightness.
  2. The front face of the GP unit, installed in a solid panel, has been tested using, conditions equivalent to the standards shown in the specification. Even though the, GP unit’s level of resistance is equivalent to these standards, oils that should have, no
  3. Regarding dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.]. Even if panel thickness is within recommend range for “Panel Cut Dimensions”, the panel could warp, depending on panel’s material, size, and insta

外部尺寸

開孔尺寸

包含接線的外部尺寸

  • 2016 05.13
  • -

GP4106G1D (單色機種) – Pro-face可程式人機介面GP4100series系列

Tags :

Category : Pro-face , 人機介面GP4100系列

GP4106G1D (單色機種) - Pro-face可程式人機介面GP4100series系列

GP-4106G
機型: GP4106G1D

Monochrome LCD   （16 灰階） /   顯示解析度: 200×80 pixels

功能規格

顯示類型 STN Monochrome LCD
顯示大小 3.4″
解析度 200 x 80 pixels
點距 W0.4 x H0.4 mm [W0.02 x H0.02 in.]
有效可視面積 79.985 x 31.985 mm
顯示顏色 Monochrome Green/Red/Orange (16 Levels)
背光 Green/Red LED (User nonreplaceable parts. Factory replacement required.)
亮度控制 16 Levels (Adjusted with the touch panel)
對比控制 8 Levels (Adjusted with the touch panel)
背光使用年限 Green: 50,000 hrs. or more, Red 10,000 hrs. or more (each in continuous operation at 25℃ before backlight brightness decreases to 50%)
語言字型 Japanese, ASCII, Chinese (Simplified), Chinese (Traditional), Korean, Cyrillic, Thai
字元大小 Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts, Stroke font: 6 to 80 pixel fonts, Image font: 8 to 72 pixel fonts
字型大小 Standard font: Width can be expanded up to 8 times. Height can be expanded up to 8 times.
文字 8 x 16 點 25 char. x 5 rows
16 x 16 點 12 char. x 5 rows
32 x 32 點 6 char. x 2 rows
應用程式記憶體 FLASH EPROM 2.2 MB (Stores the Alarm History Data, Recipe Data, and Brightness/Contrast Control Settings)
資料備份 Equivalent to 128KB
時鐘精確度 Uses the clock of an external device
觸控面板類型 Resistive Film (analog)
觸控面板解析度 1,024 x 1,024
觸控面板使用年限 1,000,000 times or more
介面 序列埠 (COM1) RS-422/485, Asynchronous Transmission, Data Length: 7 or 8 bit, Parity: none, Odd or Even, Stop Bit: 1 or 2 bit, Data Transmission Speed: 2,400 bps to 115.2 kbps, Connector: 2-piece terminal block 9 pin
USB (TYPE-A) Conforms to USB2.0 (Type-A) x 1, Power Supply Voltage: DC 5 V ±5 %, Communication Distance: 5 m or less
USB (mini-B) Conforms to USB2.0 (mini-B) x 1, Communication Distance: 5 m or less
  1. The backlight burnout detection function is not supported.
  2. Please refer to the GP-Pro EX Reference Manual for details on font types and character codes.
  3. Other font sizes can be set up with the Editor software.
  4. Capacity available for user application.
  5. Application memory can provide 128KB for Data Backup. For further information, please refer to the GP-Pro EX reference manual.
  6. Set up the “Clock Updates“ feature with the Editor software. Please refer to the GP-Pro EX Reference Manual “Common” – “Clock Update Settings” for details.
  7. If connecting a bar code reader to the GP, be sure to supply power from an external source (such as a self-powered hub). If connecting a bar code reader to the GP, be sure to supply power from an external source (such as a self-powered hub). If you supply

一般規格

國際安全標準

 

absce   ctick dnv eac   kc   ul508 ul508ansi
輸入電壓 DC 24 V
額定電壓 DC 19.2 to 28.8 V
允許的壓降 3 ms or less
消耗功率 6.2 W or less
湧入電流 30 A or less
耐壓特性 AC 1,000 V, 20 mA for 1 min (between charging and FG terminals)
絕緣電阻 DC 500 V, 10 MΩ or more (between charging and FG terminals)
周圍空氣溫度 0 to 50 ℃
儲存溫度 -20 to +60 ℃
環境濕度 10 to 90 % RH (Wet bulb temperature: 39 ℃ or less – no condensation.)
儲存濕度 10 to 90 % RH (Wet bulb temperature: 39 ℃ or less – no condensation.)
灰塵 0.1 mg/m³ or less (non-conductive levels)
汙染程度 For use in Pollution Degree 2 environment
環境規格 Free of corrosive gases
耐氣壓震動（高度範圍） 800 to 1,114 hPa (2,000 m above sea level or less)
耐震動 IEC/EN61131-2 compliant, 5 to 9 Hz Single amplitude 3.5 mm [0.14 in.], 9 to 150 Hz Fixed acceleration: 9.8 m/s², X, Y, Z directions for 10 cycles (100 min)
耐衝擊 IEC/EN61131-2 compliant, 147 m/s², X, Y, Z directions for 3 times
耐雜訊 Noise Voltage: 1,000 Vp-p, Pulse Duration: 1 µs, Rise Time: 1 ns, (via noise simulator)
耐雜訊（快速暫態突發雜訊） Power Line: 2 kV (IEC/EN61000-4-4), COM Port: 1 kV (IEC/EN61000-4-4)
抗靜電放電力 Contact Discharge Method: 6 kV/Air Discharge Method: 8 kV (IEC/EN61000-4-2 Level 3)
接地 Functional grounding: Grounding resistance of 100Ω, 2mm² or thicker wire, or your country’s applicable standard. (Same for FG and SG terminals)
結構規格 IP65f NEMA #250 TYPE 4X/13 (on the front panel when properly installed in an enclosure)
安裝配置 Embedded panel
冷卻方法 Natural air circulation
大約重量 0.2 kg [0.4 lb] or less (display unit only)
外部尺寸 W116.5 x H77.5 x D28 mm [W4.59 x H3.05 x D1.1 in.]
挖孔尺寸 W105 x H66 mm [W4.13 x H2.6 in.], 面板厚度區域 : 1 to 5 mm [0.04 至 0.2 in.]
  1. When using in an environment where the temperature becomes or exceeds 40 ℃ for an extended period of time, the screen contrast level may decrease from its original level of brightness.
  2. The front face of the GP unit, installed in a solid panel, has been tested using, conditions equivalent to the standards shown in the specification. Even though the, GP unit’s level of resistance is equivalent to these standards, oils that should have, no
  3. Regarding dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.]. Even if panel thickness is within recommend range for “Panel Cut Dimensions”, the panel could warp, depending on panel’s material, size, and insta

外部尺寸

開孔尺寸

包含接線的外部尺寸

  • 2016 05.13
  • -

GP4105W1D (單色機種) – Pro-face可程式人機介面GP4100series系列

Tags :

Category : Pro-face , 人機介面GP4100系列

GP4105W1D (單色機種) - Pro-face可程式人機介面GP4100series系列

GP-4105W
機型: GP4105W1D

Monochrome LCD   （16 灰階） /   顯示解析度: 200×80 pixels

功能規格

顯示類型 STN Monochrome LCD
顯示大小 3.4″
解析度 200 x 80 pixels
點距 W0.4 x H0.4 mm [W0.02 x H0.02 in.]
有效可視面積 79.985 x 31.985 mm
顯示顏色 Monochrome White/Red/Pink (16 Levels)
背光 White/Red LED (User nonreplaceable parts. Factory replacement required.)
亮度控制 16 Levels (Adjusted with the touch panel)
對比控制 8 Levels (Adjusted with the touch panel)
背光使用年限 White: 50,000 hrs. or more, Red 10,000 hrs. or more (each in continuous operation at 25℃ before backlight brightness decreases to 50%)
語言字型 Japanese, ASCII, Chinese (Simplified), Chinese (Traditional), Korean, Cyrillic, Thai
字元大小 Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts, Stroke font: 6 to 80 pixel fonts, Image font: 8 to 72 pixel fonts
字型大小 Standard font: Width can be expanded up to 8 times. Height can be expanded up to 8 times.
文字 8 x 16 點 25 char. x 5 rows
16 x 16 點 12 char. x 5 rows
32 x 32 點 6 char. x 2 rows
應用程式記憶體 FLASH EPROM 2.2 MB (Stores the Alarm History Data, Recipe Data, and Brightness/Contrast Control Settings)
資料備份 Equivalent to 128KB
時鐘精確度 Uses the clock of an external device
觸控面板類型 Resistive Film (analog)
觸控面板解析度 1,024 x 1,024
觸控面板使用年限 1,000,000 times or more
介面 序列埠 (COM1) RS-232C, Asynchronous Transmission, Data Length: 7 or 8 bit, Parity: none, Odd or Even, Stop Bit: 1 or 2 bit, Data Transmission Speed: 2,400 bps to 115.2 kbps, Connector: 2-piece terminal block 9 pin
USB (TYPE-A) Conforms to USB2.0 (Type-A) x 1, Power Supply Voltage: DC 5 V ±5 %, Communication Distance: 5 m or less
USB (mini-B) Conforms to USB2.0 (mini-B) x 1, Communication Distance: 5 m or less
  1. The backlight burnout detection function is not supported.
  2. Please refer to the GP-Pro EX Reference Manual for details on font types and character codes.
  3. Other font sizes can be set up with the Editor software.
  4. Capacity available for user application.
  5. Application memory can provide 128KB for Data Backup. For further information, please refer to the GP-Pro EX reference manual.
  6. Set up the “Clock Updates“ feature with the Editor software. Please refer to the GP-Pro EX Reference Manual “Common” – “Clock Update Settings” for details.
  7. If connecting a bar code reader to the GP, be sure to supply power from an external source (such as a self-powered hub). If connecting a bar code reader to the GP, be sure to supply power from an external source (such as a self-powered hub). If you supply

一般規格

國際安全標準

 

absce   ctick dnv eac   kc   ul508 ul508ansi
輸入電壓 DC 24 V
額定電壓 DC 19.2 to 28.8 V
允許的壓降 3 ms or less
消耗功率 6 W or less
湧入電流 30 A or less
耐壓特性 AC 1,000 V, 20 mA for 1 min (between charging and FG terminals)
絕緣電阻 DC 500 V, 10 MΩ or more (between charging and FG terminals)
周圍空氣溫度 0 to 50 ℃
儲存溫度 -20 to +60 ℃
環境濕度 10 to 90 % RH (Wet bulb temperature: 39 ℃ or less – no condensation.)
儲存濕度 10 to 90 % RH (Wet bulb temperature: 39 ℃ or less – no condensation.)
灰塵 0.1 mg/m³ or less (non-conductive levels)
汙染程度 For use in Pollution Degree 2 environment
環境規格 Free of corrosive gases
耐氣壓震動（高度範圍） 800 to 1,114 hPa (2,000 m above sea level or less)
耐震動 IEC/EN61131-2 compliant, 5 to 9 Hz Single amplitude 3.5 mm [0.14 in.], 9 to 150 Hz Fixed acceleration: 9.8 m/s², X, Y, Z directions for 10 cycles (100 min)
耐衝擊 IEC/EN61131-2 compliant, 147 m/s², X, Y, Z directions for 3 times
耐雜訊 Noise Voltage: 1,000 Vp-p, Pulse Duration: 1 µs, Rise Time: 1 ns, (via noise simulator)
耐雜訊（快速暫態突發雜訊） Power Line: 2 kV (IEC/EN61000-4-4), COM Port: 1 kV (IEC/EN61000-4-4)
抗靜電放電力 Contact Discharge Method: 6 kV/Air Discharge Method: 8 kV (IEC/EN61000-4-2 Level 3)
接地 Functional grounding: Grounding resistance of 100Ω, 2mm² or thicker wire, or your country’s applicable standard. (Same for FG and SG terminals)
結構規格 IP65f NEMA #250 TYPE 4X/13 (on the front panel when properly installed in an enclosure)
安裝配置 Embedded panel
冷卻方法 Natural air circulation
大約重量 0.2 kg [0.4 lb] or less (display unit only)
外部尺寸 W116.5 x H77.5 x D28 mm [W4.59 x H3.05 x D1.1 in.]
挖孔尺寸 W105 x H66 mm [W4.13 x H2.6 in.], 面板厚度區域 : 1 to 5 mm [0.04 至 0.2 in.]
  1. When using in an environment where the temperature becomes or exceeds 40 ℃ for an extended period of time, the screen contrast level may decrease from its original level of brightness.
  2. The front face of the GP unit, installed in a solid panel, has been tested using, conditions equivalent to the standards shown in the specification. Even though the, GP unit’s level of resistance is equivalent to these standards, oils that should have, no
  3. Regarding dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.]. Even if panel thickness is within recommend range for “Panel Cut Dimensions”, the panel could warp, depending on panel’s material, size, and insta

外部尺寸

開孔尺寸

GP4106W1D開孔尺寸

包含接線的外部尺寸

GP4106W1D包含接線的外部尺寸

  • 2016 05.13
  • -

GP4105G1D (單色機種) – Pro-face可程式人機介面GP4100series系列

Tags :

Category : Pro-face , 人機介面GP4100系列

GP4105G1D (單色機種) - Pro-face可程式人機介面GP4100series系列

GP-4105G
機型: GP4105G1D

Monochrome LCD   （16 灰階） /   顯示解析度: 200×80 pixels

功能規格

顯示類型 STN Monochrome LCD
顯示大小 3.4″
解析度 200 x 80 pixels
點距 W0.4 x H0.4 mm [W0.02 x H0.02 in.]
有效可視面積 79.985 x 31.985 mm
顯示顏色 Monochrome Green/Red/Orange (16 Levels)
背光 Green/Red LED (User nonreplaceable parts. Factory replacement required.)
亮度控制 16 Levels (Adjusted with the touch panel)
對比控制 8 Levels (Adjusted with the touch panel)
背光使用年限 Green: 50,000 hrs. or more, Red 10,000 hrs. or more (each in continuous operation at 25℃ before backlight brightness decreases to 50%)
語言字型 Japanese, ASCII, Chinese (Simplified), Chinese (Traditional), Korean, Cyrillic, Thai
字元大小 Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts, Stroke font: 6 to 80 pixel fonts, Image font: 8 to 72 pixel fonts
字型大小 Standard font: Width can be expanded up to 8 times. Height can be expanded up to 8 times.
文字 8 x 16 點 25 char. x 5 rows
16 x 16 點 12 char. x 5 rows
32 x 32 點 6 char. x 2 rows
應用程式記憶體 FLASH EPROM 2.2 MB (Stores the Alarm History Data, Recipe Data, and Brightness/Contrast Control Settings)
資料備份 Equivalent to 128KB
時鐘精確度 Uses the clock of an external device
觸控面板類型 Resistive Film (analog)
觸控面板解析度 1,024 x 1,024
觸控面板使用年限 1,000,000 times or more
介面 序列埠 (COM1) RS-232C, Asynchronous Transmission, Data Length: 7 or 8 bit, Parity: none, Odd or Even, Stop Bit: 1 or 2 bit, Data Transmission Speed: 2,400 bps to 115.2 kbps, Connector: 2-piece terminal block 9 pin
USB (TYPE-A) Conforms to USB2.0 (Type-A) x 1, Power Supply Voltage: DC 5 V ±5 %, Communication Distance: 5 m or less
USB (mini-B) Conforms to USB2.0 (mini-B) x 1, Communication Distance: 5 m or less
  1. The backlight burnout detection function is not supported.
  2. Please refer to the GP-Pro EX Reference Manual for details on font types and character codes.
  3. Other font sizes can be set up with the Editor software.
  4. Capacity available for user application.
  5. Application memory can provide 128KB for Data Backup. For further information, please refer to the GP-Pro EX reference manual.
  6. Set up the “Clock Updates“ feature with the Editor software. Please refer to the GP-Pro EX Reference Manual “Common” – “Clock Update Settings” for details.
  7. If connecting a bar code reader to the GP, be sure to supply power from an external source (such as a self-powered hub). If connecting a bar code reader to the GP, be sure to supply power from an external source (such as a self-powered hub). If you supply

一般規格

國際安全標準

 

absce   ctick dnv eac   kc   ul508 ul508ansi
輸入電壓 DC 24 V
額定電壓 DC 19.2 to 28.8 V
允許的壓降 3 ms or less
消耗功率 6 W or less
湧入電流 30 A or less
耐壓特性 AC 1,000 V, 20 mA for 1 min (between charging and FG terminals)
絕緣電阻 DC 500 V, 10 MΩ or more (between charging and FG terminals)
周圍空氣溫度 0 to 50 ℃
儲存溫度 -20 to +60 ℃
環境濕度 10 to 90 % RH (Wet bulb temperature: 39 ℃ or less – no condensation.)
儲存濕度 10 to 90 % RH (Wet bulb temperature: 39 ℃ or less – no condensation.)
灰塵 0.1 mg/m³ or less (non-conductive levels)
汙染程度 For use in Pollution Degree 2 environment
環境規格 Free of corrosive gases
耐氣壓震動（高度範圍） 800 to 1,114 hPa (2,000 m above sea level or less)
耐震動 IEC/EN61131-2 compliant, 5 to 9 Hz Single amplitude 3.5 mm [0.14 in.], 9 to 150 Hz Fixed acceleration: 9.8 m/s², X, Y, Z directions for 10 cycles (100 min)
耐衝擊 IEC/EN61131-2 compliant, 147 m/s², X, Y, Z directions for 3 times
耐雜訊 Noise Voltage: 1,000 Vp-p, Pulse Duration: 1 µs, Rise Time: 1 ns, (via noise simulator)
耐雜訊（快速暫態突發雜訊） Power Line: 2 kV (IEC/EN61000-4-4), COM Port: 1 kV (IEC/EN61000-4-4)
抗靜電放電力 Contact Discharge Method: 6 kV/Air Discharge Method: 8 kV (IEC/EN61000-4-2 Level 3)
接地 Functional grounding: Grounding resistance of 100Ω, 2mm² or thicker wire, or your country’s applicable standard. (Same for FG and SG terminals)
結構規格 IP65f NEMA #250 TYPE 4X/13 (on the front panel when properly installed in an enclosure)
安裝配置 Embedded panel
冷卻方法 Natural air circulation
大約重量 0.2 kg [0.4 lb] or less (display unit only)
外部尺寸 W116.5 x H77.5 x D28 mm [W4.59 x H3.05 x D1.1 in.]
挖孔尺寸 W105 x H66 mm [W4.13 x H2.6 in.], 面板厚度區域 : 1 to 5 mm [0.04 至 0.2 in.]
  1. When using in an environment where the temperature becomes or exceeds 40 ℃ for an extended period of time, the screen contrast level may decrease from its original level of brightness.
  2. The front face of the GP unit, installed in a solid panel, has been tested using, conditions equivalent to the standards shown in the specification. Even though the, GP unit’s level of resistance is equivalent to these standards, oils that should have, no
  3. Regarding dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.]. Even if panel thickness is within recommend range for “Panel Cut Dimensions”, the panel could warp, depending on panel’s material, size, and insta

外部尺寸

開孔尺寸

包含接線的外部尺寸

 

  • 2016 05.13
  • -

GP4104W1D (單色機種) – Pro-face可程式人機介面GP4100series系列

Tags :

Category : Pro-face , 人機介面GP4100系列

GP4104W1D (單色機種) - Pro-face可程式人機介面GP4100series系列

GP-4104W
機型: GP4104W1D

Monochrome LCD   （16 灰階） /   顯示解析度: 200×80 pixels

功能規格

顯示類型 STN Monochrome LCD
顯示大小 3.4″
解析度 200 x 80 pixels
點距 W0.4 x H0.4 mm [W0.02 x H0.02 in.]
有效可視面積 79.985 x 31.985 mm
顯示顏色 Monochrome White/Red/Pink (16 Levels)
背光 White/Red LED (User nonreplaceable parts. Factory replacement required.)
亮度控制 16 Levels (Adjusted with the touch panel)
對比控制 8 Levels (Adjusted with the touch panel)
背光使用年限 White: 50,000 hrs. or more, Red 10,000 hrs. or more (each in continuous operation at 25℃ before backlight brightness decreases to 50%)
語言字型 Japanese, ASCII, Chinese (Simplified), Chinese (Traditional), Korean, Cyrillic, Thai
字元大小 Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts, Stroke font: 6 to 80 pixel fonts, Image font: 8 to 72 pixel fonts
字型大小 Standard font: Width can be expanded up to 8 times. Height can be expanded up to 8 times.
文字 8 x 16 點 25 char. x 5 rows
16 x 16 點 12 char. x 5 rows
32 x 32 點 6 char. x 2 rows
應用程式記憶體 FLASH EPROM 2.2 MB (Stores the Alarm History Data, Recipe Data, and Brightness/Contrast Control Settings)
資料備份 Equivalent to 128KB
時鐘精確度 Uses the clock of an external device
觸控面板類型 Resistive Film (analog)
觸控面板解析度 1,024 x 1,024
觸控面板使用年限 1,000,000 times or more
介面 乙太網路 (LAN) IEEE802.3i/IEEE802.3u, 10BASE-T/100BASE-TX, Connector: Modular jack (RJ-45) x 1
USB (TYPE-A) Conforms to USB2.0 (Type-A) x 1, Power Supply Voltage: DC 5 V ±5 %, Communication Distance: 5 m or less
USB (mini-B) Conforms to USB2.0 (mini-B) x 1, Communication Distance: 5 m or less
  1. The backlight burnout detection function is not supported.
  2. Please refer to the GP-Pro EX Reference Manual for details on font types and character codes.
  3. Other font sizes can be set up with the Editor software.
  4. Capacity available for user application.
  5. Application memory can provide 128KB for Data Backup. For further information, please refer to the GP-Pro EX reference manual.
  6. Set up the “Clock Updates“ feature with the Editor software. Please refer to the GP-Pro EX Reference Manual “Common” – “Clock Update Settings” for details.
  7. If connecting a bar code reader to the GP, be sure to supply power from an external source (such as a self-powered hub). If connecting a bar code reader to the GP, be sure to supply power from an external source (such as a self-powered hub). If you supply

一般規格

國際安全標準

 

ce   ctick  eac   kc   ul508 ul508ansi
輸入電壓 DC 24 V
額定電壓 DC 19.2 to 28.8 V
允許的壓降 3 ms or less
消耗功率 6 W or less
湧入電流 30 A or less
耐壓特性 AC 1,000 V, 20 mA for 1 min (between charging and FG terminals)
絕緣電阻 DC 500 V, 10 MΩ or more (between charging and FG terminals)
周圍空氣溫度 0 to 50 ℃
儲存溫度 -20 to +60 ℃
環境濕度 10 to 90 % RH (Wet bulb temperature: 39 ℃ or less – no condensation.)
儲存濕度 10 to 90 % RH (Wet bulb temperature: 39 ℃ or less – no condensation.)
灰塵 0.1 mg/m³ or less (non-conductive levels)
汙染程度 For use in Pollution Degree 2 environment
環境規格 Free of corrosive gases
耐氣壓震動（高度範圍） 800 to 1,114 hPa (2,000 m above sea level or less)
耐震動 IEC/EN61131-2 compliant, 5 to 9 Hz Single amplitude 3.5 mm [0.14 in.], 9 to 150 Hz Fixed acceleration: 9.8 m/s², X, Y, Z directions for 10 cycles (100 min)
耐衝擊 IEC/EN61131-2 compliant, 147 m/s², X, Y, Z directions for 3 times
耐雜訊 Noise Voltage: 1,000 Vp-p, Pulse Duration: 1 µs, Rise Time: 1 ns, (via noise simulator)
耐雜訊（快速暫態突發雜訊） Power Line: 2 kV (IEC/EN61000-4-4)
抗靜電放電力 Contact Discharge Method: 6 kV/Air Discharge Method: 8 kV (IEC/EN61000-4-2 Level 3)
接地 Functional grounding: Grounding resistance of 100Ω, 2mm² or thicker wire, or your country’s applicable standard. (Same for FG and SG terminals)
結構規格 IP65f NEMA #250 TYPE 4X/13 (on the front panel when properly installed in an enclosure)
安裝配置 Embedded panel
冷卻方法 Natural air circulation
大約重量 0.2 kg [0.4 lb] or less (display unit only)
外部尺寸 W116.5 x H77.5 x D28 mm [W4.59 x H3.05 x D1.1 in.]
挖孔尺寸 W105 x H66 mm [W4.13 x H2.6 in.], 面板厚度區域 : 1 to 5 mm [0.04 至 0.2 in.]
  1. When using in an environment where the temperature becomes or exceeds 40 ℃ for an extended period of time, the screen contrast level may decrease from its original level of brightness.
  2. The front face of the GP unit, installed in a solid panel, has been tested using, conditions equivalent to the standards shown in the specification. Even though the, GP unit’s level of resistance is equivalent to these standards, oils that should have, no
  3. Regarding dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.]. Even if panel thickness is within recommend range for “Panel Cut Dimensions”, the panel could warp, depending on panel’s material, size, and insta

外部尺寸

開孔尺寸

包含接線的外部尺寸

 

 

 

  1. GP units with Rev.1 or higher have protective dropping hook.
  • 2016 05.13
  • -

GP4104G1D (單色機種) – Pro-face可程式人機介面GP4100series系列

Tags :

Category : Pro-face , 人機介面GP4100系列

GP4104G1D (單色機種) - Pro-face可程式人機介面GP4100series系列

GP-4104G
機型: GP4104G1D

Monochrome LCD   （16 灰階） /   顯示解析度: 200×80 pixels

功能規格

顯示類型 STN Monochrome LCD
顯示大小 3.4″
解析度 200 x 80 pixels
點距 W0.4 x H0.4 mm [W0.02 x H0.02 in.]
有效可視面積 79.985 x 31.985 mm
顯示顏色 Monochrome Green/Red/Orange (16 Levels)
背光 Green/Red LED (User nonreplaceable parts. Factory replacement required.)
亮度控制 16 Levels (Adjusted with the touch panel)
對比控制 8 Levels (Adjusted with the touch panel)
背光使用年限 Green: 50,000 hrs. or more, Red 10,000 hrs. or more (each in continuous operation at 25℃ before backlight brightness decreases to 50%)
語言字型 Japanese, ASCII, Chinese (Simplified), Chinese (Traditional), Korean, Cyrillic, Thai
字元大小 Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts, Stroke font: 6 to 80 pixel fonts, Image font: 8 to 72 pixel fonts
字型大小 Standard font: Width can be expanded up to 8 times. Height can be expanded up to 8 times.
文字 8 x 16 點 25 char. x 5 rows
16 x 16 點 12 char. x 5 rows
32 x 32 點 6 char. x 2 rows
應用程式記憶體 FLASH EPROM 2.2 MB (Stores the Alarm History Data, Recipe Data, and Brightness/Contrast Control Settings)
資料備份 Equivalent to 128KB
時鐘精確度 Uses the clock of an external device
觸控面板類型 Resistive Film (analog)
觸控面板解析度 1,024 x 1,024
觸控面板使用年限 1,000,000 times or more
介面 乙太網路 (LAN) IEEE802.3i/IEEE802.3u, 10BASE-T/100BASE-TX, Connector: Modular jack (RJ-45) x 1
USB (TYPE-A) Conforms to USB2.0 (Type-A) x 1, Power Supply Voltage: DC 5 V ±5 %, Communication Distance: 5 m or less
USB (mini-B) Conforms to USB2.0 (mini-B) x 1, Communication Distance: 5 m or less
  1. The backlight burnout detection function is not supported.
  2. Please refer to the GP-Pro EX Reference Manual for details on font types and character codes.
  3. Other font sizes can be set up with the Editor software.
  4. Capacity available for user application.
  5. Application memory can provide 128KB for Data Backup. For further information, please refer to the GP-Pro EX reference manual.
  6. Set up the “Clock Updates“ feature with the Editor software. Please refer to the GP-Pro EX Reference Manual “Common” – “Clock Update Settings” for details.
  7. If connecting a bar code reader to the GP, be sure to supply power from an external source (such as a self-powered hub). If connecting a bar code reader to the GP, be sure to supply power from an external source (such as a self-powered hub). If you supply

一般規格

國際安全標準

 

ce   ctick  eac   kc   ul508 ul508ansi
輸入電壓 DC 24 V
額定電壓 DC 19.2 to 28.8 V
允許的壓降 3 ms or less
消耗功率 6 W or less
湧入電流 30 A or less
耐壓特性 AC 1,000 V, 20 mA for 1 min (between charging and FG terminals)
絕緣電阻 DC 500 V, 10 MΩ or more (between charging and FG terminals)
周圍空氣溫度 0 to 50 ℃
儲存溫度 -20 to +60 ℃
環境濕度 10 to 90 % RH (Wet bulb temperature: 39 ℃ or less – no condensation.)
儲存濕度 10 to 90 % RH (Wet bulb temperature: 39 ℃ or less – no condensation.)
灰塵 0.1 mg/m³ or less (non-conductive levels)
汙染程度 For use in Pollution Degree 2 environment
環境規格 Free of corrosive gases
耐氣壓震動（高度範圍） 800 to 1,114 hPa (2,000 m above sea level or less)
耐震動 IEC/EN61131-2 compliant, 5 to 9 Hz Single amplitude 3.5 mm [0.14 in.], 9 to 150 Hz Fixed acceleration: 9.8 m/s², X, Y, Z directions for 10 cycles (100 min)
耐衝擊 IEC/EN61131-2 compliant, 147 m/s², X, Y, Z directions for 3 times
耐雜訊 Noise Voltage: 1,000 Vp-p, Pulse Duration: 1 µs, Rise Time: 1 ns, (via noise simulator)
耐雜訊（快速暫態突發雜訊） Power Line: 2 kV (IEC/EN61000-4-4)
抗靜電放電力 Contact Discharge Method: 6 kV/Air Discharge Method: 8 kV (IEC/EN61000-4-2 Level 3)
接地 Functional grounding: Grounding resistance of 100Ω, 2mm² or thicker wire, or your country’s applicable standard. (Same for FG and SG terminals)
結構規格 IP65f NEMA #250 TYPE 4X/13 (on the front panel when properly installed in an enclosure)
安裝配置 Embedded panel
冷卻方法 Natural air circulation
大約重量 0.2 kg [0.4 lb] or less (display unit only)
外部尺寸 W116.5 x H77.5 x D28 mm [W4.59 x H3.05 x D1.1 in.]
挖孔尺寸 W105 x H66 mm [W4.13 x H2.6 in.], 面板厚度區域 : 1 to 5 mm [0.04 至 0.2 in.]
  1. When using in an environment where the temperature becomes or exceeds 40 ℃ for an extended period of time, the screen contrast level may decrease from its original level of brightness.
  2. The front face of the GP unit, installed in a solid panel, has been tested using, conditions equivalent to the standards shown in the specification. Even though the, GP unit’s level of resistance is equivalent to these standards, oils that should have, no
  3. Regarding dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.]. Even if panel thickness is within recommend range for “Panel Cut Dimensions”, the panel could warp, depending on panel’s material, size, and insta

外部尺寸

開孔尺寸

包含接線的外部尺寸

« 上一頁 — 下一頁 »

即時詢價

加入line好友id：@dml9854r
加入凱虹企業LINE@
ID : @dml9854r
銷售品牌
最新產品
聯絡凱虹
凱虹企業有限公司
台南市中華北路二段49號
[email protected]
電話 (06) 358-5230
傳真 (06) 358-6572
統編 24899047
即時詢價
加入line好友id：@dml9854r
加入凱虹企業LINE@
ID : @dml9854r

© 2016 凱虹企業有限公司