ST6000 /ET6000全新人機取代GP4000



GP4106W1D (單色機種) – Pro-face可程式人機介面GP4100series系列

  • -

GP4106W1D (單色機種) – Pro-face可程式人機介面GP4100series系列

GP4106W1D (單色機種) - Pro-face可程式人機介面GP4100series系列

GP-4106W
機型: GP4106W1D

Monochrome LCD   (16 灰階) /   顯示解析度: 200×80 pixels

功能規格

顯示類型 STN Monochrome LCD
顯示大小 3.4″
解析度 200 x 80 pixels
點距 W0.4 x H0.4 mm [W0.02 x H0.02 in.]
有效可視面積 79.985 x 31.985 mm
顯示顏色 Monochrome White/Red/Pink (16 Levels)
背光 White/Red LED (User nonreplaceable parts. Factory replacement required.)
亮度控制 16 Levels (Adjusted with the touch panel)
對比控制 8 Levels (Adjusted with the touch panel)
背光使用年限 White: 50,000 hrs. or more, Red 10,000 hrs. or more (each in continuous operation at 25℃ before backlight brightness decreases to 50%)
語言字型 Japanese, ASCII, Chinese (Simplified), Chinese (Traditional), Korean, Cyrillic, Thai
字元大小 Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts, Stroke font: 6 to 80 pixel fonts, Image font: 8 to 72 pixel fonts
字型大小 Standard font: Width can be expanded up to 8 times. Height can be expanded up to 8 times.
文字 8 x 16 點 25 char. x 5 rows
16 x 16 點 12 char. x 5 rows
32 x 32 點 6 char. x 2 rows
應用程式記憶體 FLASH EPROM 2.2 MB (Stores the Alarm History Data, Recipe Data, and Brightness/Contrast Control Settings)
資料備份 Equivalent to 128KB
時鐘精確度 Uses the clock of an external device
觸控面板類型 Resistive Film (analog)
觸控面板解析度 1,024 x 1,024
觸控面板使用年限 1,000,000 times or more
介面 序列埠 (COM1) RS-422/485, Asynchronous Transmission, Data Length: 7 or 8 bit, Parity: none, Odd or Even, Stop Bit: 1 or 2 bit, Data Transmission Speed: 2,400 bps to 115.2 kbps, Connector: 2-piece terminal block 9 pin
USB (TYPE-A) Conforms to USB2.0 (Type-A) x 1, Power Supply Voltage: DC 5 V ±5 %, Communication Distance: 5 m or less
USB (mini-B) Conforms to USB2.0 (mini-B) x 1, Communication Distance: 5 m or less
  1. The backlight burnout detection function is not supported.
  2. Please refer to the GP-Pro EX Reference Manual for details on font types and character codes.
  3. Other font sizes can be set up with the Editor software.
  4. Capacity available for user application.
  5. Application memory can provide 128KB for Data Backup. For further information, please refer to the GP-Pro EX reference manual.
  6. Set up the “Clock Updates“ feature with the Editor software. Please refer to the GP-Pro EX Reference Manual “Common” – “Clock Update Settings” for details.
  7. If connecting a bar code reader to the GP, be sure to supply power from an external source (such as a self-powered hub). If connecting a bar code reader to the GP, be sure to supply power from an external source (such as a self-powered hub). If you supply

一般規格

國際安全標準

 

absce   ctick dnv eac   kc   ul508 ul508ansi

輸入電壓 DC 24 V
額定電壓 DC 19.2 to 28.8 V
允許的壓降 3 ms or less
消耗功率 6.2 W or less
湧入電流 30 A or less
耐壓特性 AC 1,000 V, 20 mA for 1 min (between charging and FG terminals)
絕緣電阻 DC 500 V, 10 MΩ or more (between charging and FG terminals)
周圍空氣溫度 0 to 50 ℃
儲存溫度 -20 to +60 ℃
環境濕度 10 to 90 % RH (Wet bulb temperature: 39 ℃ or less – no condensation.)
儲存濕度 10 to 90 % RH (Wet bulb temperature: 39 ℃ or less – no condensation.)
灰塵 0.1 mg/m³ or less (non-conductive levels)
汙染程度 For use in Pollution Degree 2 environment
環境規格 Free of corrosive gases
耐氣壓震動(高度範圍) 800 to 1,114 hPa (2,000 m above sea level or less)
耐震動 IEC/EN61131-2 compliant, 5 to 9 Hz Single amplitude 3.5 mm [0.14 in.], 9 to 150 Hz Fixed acceleration: 9.8 m/s², X, Y, Z directions for 10 cycles (100 min)
耐衝擊 IEC/EN61131-2 compliant, 147 m/s², X, Y, Z directions for 3 times
耐雜訊 Noise Voltage: 1,000 Vp-p, Pulse Duration: 1 µs, Rise Time: 1 ns, (via noise simulator)
耐雜訊(快速暫態突發雜訊) Power Line: 2 kV (IEC/EN61000-4-4), COM Port: 1 kV (IEC/EN61000-4-4)
抗靜電放電力 Contact Discharge Method: 6 kV/Air Discharge Method: 8 kV (IEC/EN61000-4-2 Level 3)
接地 Functional grounding: Grounding resistance of 100Ω, 2mm² or thicker wire, or your country’s applicable standard. (Same for FG and SG terminals)
結構規格 IP65f NEMA #250 TYPE 4X/13 (on the front panel when properly installed in an enclosure)
安裝配置 Embedded panel
冷卻方法 Natural air circulation
大約重量 0.2 kg [0.4 lb] or less (display unit only)
外部尺寸 W116.5 x H77.5 x D28 mm [W4.59 x H3.05 x D1.1 in.]
挖孔尺寸 W105 x H66 mm [W4.13 x H2.6 in.], 面板厚度區域 : 1 to 5 mm [0.04 至 0.2 in.]
  1. When using in an environment where the temperature becomes or exceeds 40 ℃ for an extended period of time, the screen contrast level may decrease from its original level of brightness.
  2. The front face of the GP unit, installed in a solid panel, has been tested using, conditions equivalent to the standards shown in the specification. Even though the, GP unit’s level of resistance is equivalent to these standards, oils that should have, no
  3. Regarding dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.]. Even if panel thickness is within recommend range for “Panel Cut Dimensions”, the panel could warp, depending on panel’s material, size, and insta

外部尺寸

開孔尺寸

包含接線的外部尺寸


即時詢價

加入line好友id:@dml9854r
加入凱虹企業LINE@
ID : @dml9854r